MAINTENANCE - Every 60,000 mi / 96,000 km / 6 Months Every 60,000 mi / 96,000 km / 6 Months 12 Drive Axle (SISU) Drive Axle (SISU) Oil Servicing on page 287 Drive Axle (SISU) Inspection on page 287 Drive Axle - SISU Breather and Brakes on page 287 Rear Suspension - U-bolts Check the torque. Tighten to specified torque value as required. (Refer to Suspension U-Bolts, Grade 8 on page 306 for maintenance instructions.) 5 Drum Brakes (All) - Brake Camshaft Bearing Check for excessive camshaft play in the axial and radial directions. Max allowable play is 0.003 in.
Lubricate (NLGI #2 grease.) (Refer to Drum Brake Inspection on page 241 for maintenance instructions.) Drum Brakes (All) - Brake Air System Clean or replace the inline filters. (Refer to Air System on page 232 for maintenance instructions.) Disc Brakes (Bendix ® ) - Brake Pads Inspect: replace as required. (Refer to How to inspect brake pads on disc brakes on page 240 for maintenance instructions.) Disc Brakes (Bendix ® ) - Brake Disc/rotor Inspect for visible cracks, heat checking, galling, or scoring of surface.
Check for runout (max allowable is 0.002 in.) (Refer to Air Disc Brakes on page 240 for maintenance instructions.) Disc Brakes (Bendix®) - Caliper Sliding Function Ensure caliper slides freely with no obstructions or excessive play. (Refer to Air Disc Brakes on page 240 for maintenance instructions.) 12 Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of those listed here. 216 Y53-6126-1A1 (01/21)