MAINTENANCE - Cab Maintenance 1. Start the vehicle and get the air system up to normal operating pressure. Do not apply the parking brake. 2. Apply pressure to the brake pedal and measure the distance the air chamber pushrod traveled. 3. Compare the results to the specification to determine if the automatic slack adjusters need replacing. Automatic Slack Adjuster Stroke Specification WARNING 5 1. Retracted position, no brake pedal applied 2. Applied position, brake pedal engaged Manual adjustment of automatic slack adjusters is a dangerous practice that could have serious consequences. It gives the operator a false sense of se- curity about the effectiveness of the brakes.
Contact the Service Depart- ment at your dealership if the stroke exceeds specifications. A stroke ex- ceeding specifications may indicate a problem with the slack adjuster or the brake foundation. Cab Maintenance Drum Brake Inspection Have brake drum linings inspected by a qualified mechanic for wear at regular intervals according to the maintenance schedule. In severe service or off-highway applications inspect the linings more frequently. In addition, periodically check the brake chamber stroke. Replace the slack adjuster if proper stroke cannot be maintained.
Operational checks of automatic slack adjusters Cab exterior, interior, frame and engine compartment components need maintenance to ensure longevity and safe operations. A clean vehicle also allows leaks to be detected easier. Y53-6126-1A1 (01/21) 241 Chamber Type Stroke 36 (rear brakes) 1.5-2.5 in. (38-57 mm) 30 (rear brakes) 1.5-2 in. (38-51 mm) 16, 20 and 24 (front brakes) 1-1.75 in. (25.4-44.4 mm)