PACCAR 567 — Cab Maintenance

MAINTENANCE - Cab Maintenance Chrome surfaces are best cleaned with fresh water. Wipe dry to preserve their luster. A commercial chrome cleaner will remove light rust. After cleaning, wax flat surfaces and apply a thin coat of rust preventive lubricant around bolts or other fasteners. Clean aluminum wheels and bumpers with cool water. Tar- remover will get rid of heavy deposits of road grime. To prevent spotting, wipe aluminum surfaces dry after washing. Under corrosive conditions, such as driving on salted roads, clean aluminum parts with steam or high- pressure water from a hose. A mild automotive soap solution will help. Rinse thoroughly.

To maintain the tailpipe's quality finish, wash the tailpipe with a soft cloth, mild automotive soap, and water or glass cleaner. A non-abrasive chrome polish can be used sparingly on hard-to-clean areas. DO NOT clean your high-heat chrome using scouring pads, abrasive chrome polish, highly acidic chemical cleaners or any other abrasive cleaners. Even high quality stainless steel parts can rust under prolonged exposure to salt water, especially when the salt-laden moisture is held against the metal surface by road grime. It is important to frequently clean salty moisture and grime from stainless steel surfaces.

If surface rust is encountered, wash the surface and use a commercial polishing compound to clean off the rust, followed by a coating of wax. Never use steel wool when cleaning stainless steel. Minute particles of the steel wool can become embedded in the surface of the stainless steel part and cause rust staining. CAUTION Do not direct high pressure water onto seals or flexible hoses. Water may en- ter the part which will contaminate the system lubricants and fluids. To pre- vent damage to these components, keep a gentle flow of water moving at all times. Failure to comply may result in equipment damage.

5 CAUTION Do not direct high pressure water onto electrical components, plug connec- tors, seals or flexible hoses on the en- gine. Failure to comply can accelerate corrosion and degrade electrical com- ponent which may cause a fire or equipment damage. Weather Stripping Frequent washing of the vehicle is required to remove road grime and contaminants that can stain and oxidize paint and accelerate corrosion of plated and polished metal surfaces. Waxing offers added protection against staining and oxidation. Do not apply wax in the hot sun and do not friction burn the paint with a buffing machine.

Occasionally spray weather- stripping on doors and windows with silicone compound to help preserve resiliency. This is especially useful in To prevent rust, keep chromed parts clean and protected with wax at all times, especially in winter conditions when the roads are salted. If necessary, use a commercial chrome cleaner to remove light rust. Y53-6126-1A1 (01/21) 243