PACCAR 567 — Programming Key Fobs

MAINTENANCE - Electrical System ensure correct polarity, use a test lamp or a voltmeter. need to be reprogrammed to pair with the vehicle. 2. Open the driver and passenger doors. 3. Press and hold the passenger door’s unlock button for 5 seconds, then release the button. 4. Within 3 seconds press and hold the passenger door’s lock button for 5 seconds, then release the button. At this time you should hear the vehicle cycle the locking system by unlocking, then relocking the doors. (This indicates that the door module has entered “learning mode.”) 5.

Within the next 10 seconds, press and hold the key fob’s lock button for 5 seconds, (you should hear the vehicle lock the doors) then press and release the unlock button. 6. Once programming is complete (or the 10 seconds from Step 5 has passed), the vehicle will cycle the locking system twice (unlock, lock, unlock, lock). This process should be repeated for each fob to be paired with the module. A maximum of five key fobs may be paired to a single module. Remote Keyless Entry The system will lock or unlock cab doors with the key fob. The system will alert you with parking lights when the selected doors are locked or unlocked.

There are two key fobs provided with the system which provide secure rolling code technology that prevents someone from recording the entry signal. If you have issues with a key fob, replace the battery and reprogram the key fob. In some situations, the key fob may need to be replaced and in others, a fuse may have failed that could render both key fobs inoperative. Contact your dealer for help if a key fob does not work and it is not because of a bad battery. The key fob uses one CR2032, 3V battery. Batteries should last approximately three years, depending on use. Consistently reduced range is an indicator that the battery needs replacement.

Batteries are available at most discount, hardware, and drug stores. The battery can be accessed by removing the cover of the key fob. After a new battery is installed, the key fob may How to replace key fob battery If the key fob will not unlock the doors, replace the battery. 1. Remove the cover of the key fob. 2. Replace the battery and dispose of the old battery. 3. Check to see if the key fob is still paired to the vehicle. If not, reprogram the key fob. 5 Programming Key Fobs The key fob may need to be paired with the truck when the battery is replaced or when the key fob has not been used for an extended period of time. 1. Turn the ignition switch to the ON position.

Y53-6126-1A1 (01/21) 263 Quantity Type 1 CR2032