PACCAR 567 — Topping Up the Engine Oil

MAINTENANCE - Engine Maintenance 1. Make sure that the vehicle frame rail is standing on a flat and level surface. 2. Make sure that the vehicle is horizontal, both lengthwise and crosswise. Check this carefully on a vehicle with air suspension. Note that the engine may be inclined up to 4 degrees, depending on the vehicle model and wheelbase. 3. Twist the dipstick handle to unlock it, then pull the dipstick out of the holder. 5. Place the dipstick back into the holder. 6. Pull the dipstick out again and check the oil level. The oil level should always be between the two marks on the dipstick. Topping Up the Engine Oil Engine Oil Dip Stick Markings 5 1 2 1.

Top up with oil, if necessary, via the filler opening. Use the correct grade in the correct quantity. For oil replacement, please see engine Operator’s Manual included with this chassis. 2. After topping up, wait 1 minute and check the oil level again. 1. High oil level (1) 2. Low oil level (2) 4. Wipe the dipstick clean with a lint- free cloth. 7. Reinstall the dipstick and twist to lock it in place. Y53-6126-1A1 (01/21) 265