PACCAR 567 — Check Power Steering Fluid Level

MAINTENANCE - Steering System Check Power Steering Fluid Level Power Steering Reservoir 5. Fill cap CAUTION If you check the fluid with the engine and steering system COLD, the fluid level should be above the Add indicator level and should generally not exceed the middle point between the Add and Full level indicators. If you check the fluid with the engine and steering system WARM, the fluid should NOT exceed the Full level indicator and should generally not drop below the middle point between the HOT Full and Add level indicators. 4.

To add fluid, open the fill cap to the power steering reservoir and then add fluid until the fluid level is in the middle of the appropriate Minimum and Maximum level indicators. 5. Reinstall the reservoir fill cap and close the hood. When adding fluid, be sure to use fluid of the same type. While many fluids have the same description and intend- ed purpose, they should not be mixed due to incompatible additives. Mixing incompatible fluids may lead to equip- ment damage. 5 3 2 1 4 5 NOTE Before removing reservoir cap, wipe the outside of the cap so that no dirt or debris falls into the reservoir. Check the fluid level. Use the following procedure: 1.

Park the vehicle on level ground and turn the engine off. 2. Open the hood. 3. Check the fluid level on the reservoir. 1. Cold 2. Hot 3. Full 4. Add Y53-6126-1A1 (01/21) 289