CONTROLS - Peterbilt Digital Display capable of displaying the temperature of the road surface on either the temperature display or the snowflake icon. Additionally, the outside air temperature reading may be affected by exposure to direct sunlight. Sub-trip Odometer The Trip Odometer can be split into smaller segments called Sub-trips. Start a Sub-trip by pressing Trip on the steering wheel. The maximum distance that the sub-trip will show is 9,999.9 at which point it will start over at zero. When it maxes out, the current sub-trip ends and begins a new one. Sub-trip information is also found in the settings menu Trip Summary on page 72.
Left Switch Pod View Indicator The View Indicator identifies which view is currently selected: Favorites (if enabled) Minimized Minimized with Advance Driving Assistance (Optional) Basic Enhanced 4 2 5 1 3 Trip Odometer The Trip Odometer shows how far the vehicle has gone traveled since last it was reset. The maximum distance that can be shown on the Trip Odometer is 99,999.9 at which point the operator needs to reset. Press Trip to set. Press and hold Trip to reset (Item 1 in following image). Drive, Neutral, and Reverse Indicator The Drive, Neutral, and Reverse Indicator reflects the shifter position of an Automatic Transmission.
Manual transmissions and certain automatic transmission do not provide feedback to the display. Instead, the transmission shifter indicates the gear condition. 3 1. Trip marker 2. Limiter control 3. Cruise control ON/OFF 4. Cruise control set/resume 5. Toggle switch Y53-6126-1A1 (01/21) 65