CONTROLS - Guide to the Warning Symbols Brakes, Antilock Brake System Brakes, Low Air WARNING If this chassis is equipped with an Electronic Stability Control (ESC) and is modified (e.g. adding or removing an axle, converting from a truck to a tractor, converting from a tractor to a truck, changing the body, lengthening of the wheelbase and/or frame, relo- cating frame components, or modifying pneumatic or electrical ABS/ESC har- nesses) the ESC must be evaluated by a qualified technician. If you have any questions, contact your authorized dealer. Failure to comply may result in property damage, personal injury, or death. Illuminates during the bulb check.
Have the ABS system checked by an authorized dealer if the ABS Warning Lamp stays on for more than 3 seconds. Illuminates during normal operating conditions to indicate a problem with the ABS system. Illuminates when a problem exists with Automatic Traction Control (ATC). 3 Illuminates when system air pressure falls below 60 psi. Brakes, Trailer Antilock Brake System Brake, Park Brake NOTE For more information about the stabili- ty control system installed on your ve- hicle, please refer to additional materi- al supplied with this operator manual, included in your glove box information- al packet. Illuminates in the status indicator when parking brakes are applied.
Illuminates during the bulb check and the tractor/truck is connected with a ABS equipped trailer. Illuminates during normal operating conditions to indicate a problem with the Trailer ABS System. This should be checked by an authorized dealer as soon as possible. 86 Y53-6126-1A1 (01/21)