CONTROLS - Optional Gauges Transmission, Auxiliary Turn Signal, Right of load you are carrying and the driving conditions you encounter. Maximum axle temperature may vary, depending upon the axle and type of lubricant. Very high temperatures signal a need to have your axle lubrication checked. 3 Blinks when the right turn signal or the hazard light function is operating. CAUTION Illuminates to indicate auxiliary transmission is in neutral. Optional Gauges Driving with very hot temperatures in your rear drive axles can cause seri- ous damage to axle bearings and seals. Have your axle lubrication checked if you notice a sign of over- heating.
For vehicles with a telematic navigation screen, optional gauges will be part of the screen functions. Please refer to the navigation system supplement for further details about its functions and how it works. Some vehicles may have optional analog gauges installed at the factory in place of the navigation screen. Transmission, Check Depending on the vehicle configuration, there may be a single gauge for more than just the forward and rear driver. The icon will have an "X" over the representative axle to indicate which axle's temperature is being displayed in the gauge. Illuminates when transmission has recorded a fault code.
Turn Signal, Left Drive Axle Temperature Gauge (Forward and Rear) Manifold Pressure Gauge This gauge indicates the pressure in the intake manifold. The pressure in the manifold is directly related to the turbo output and is related to the engine power output. Blinks when the left turn signal or the hazard light function is operating. These gauges indicate the temperature of the lubricant in your vehicle's axle(s). These temperatures will vary with the kind 92 Y53-6126-1A1 (01/21)