Komatsu — Full page photo print Komatsu

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE NOTICE 4 - 24 Be sure to install the air cleaner element facing in t he correct direction Install so that the bot tom of the air cleaner element c ylinder (face where no hole is drilled) (B), (C ) is at cover (3) end. If the dire ction of installation is mistaken, there is d element or serious d 8. Replace O-rin g (8) of cover (3) with a new NOTICE When inserting the e lement, if the rubber at the tip i s swollen or the outer element is not pushe d in straight, and cover (3) is assembled by force to hook (2), there is d anger that the hook and air ful when assembling. cleaner body may be be damaged, so be care 9.

Install cover (3 ) as follows. r (3) with the element. ip of hook (2) to the protruding part of the air dy and lock it in position. 1) Align cove 2) Hook the t cleaner bo 3) Always ins the ground 4) When cov between th If it is too l ip of hook (2) to the protru dy and lock it in position. tall cover (3) so that the ev acuator (4) is facing (A). er (3) is installed, check that the clearance e air cleaner body and cove r (3) is not too large. arge, install again. 10. Replace seal ( 9) on the cover (3) with a n