Komatsu — Full page photo print Komatsu

. MAINTENANCE MAINTENANCE PROCEDURE Mixing rate of water and antifreeze -40 -40 10.8 7.7 2.85 2.03 58 WARNING 4 - 26 To maintain the anticorrosion properties of Supercoolant (AF-NAC), always keep the density of Supercoolant nd 68%. between 30% a When deciding t he ratio of antifreeze to water, check the lowest temperature in the past, and de cide from the mixing table given belo w. er to estimate and temperature about 10°C (18°F) lower when deciding the mixing ratio. depends on the ambient temperature, but it should always be a minimum of 30% by volume amount of coolant x 100).

It i s actually bett er to estimate and t emperature about 10°C (18°F) l owe r whe n deciding the m The mixing ratio depends on the a alway (antifreeze/total amount of coolant x Even in areas w here it is not necess ary to prevent freez ing, use Supercoolant (AF-NAC) at a m ixing ratio of at least 30% to prevent corrosion of the cool ing system. The freezing tem perature of undilute d antifreeze is -15° C (5°F). Do not store undiluted antifre eze at a temperature of below -15°C ( 5°F). Min.

atmospheric temperature °C Above -10 -15 -20 -25 -30 -35 °F Above 14 5 -4 -13 -22 -31 lit Amount of antifreeze US ers 5.6 6.7 7.6 8.6 9.3 10.0 gal 1.48 1.77 2.01 2.27 2.46 2.64 lit ers 12.9 11.8 10.9 9.9 9.2 8.5 gal 3.41 3.12 2.88 2.62 2.43 2.25 Proportion by volume % 30 36 41 46 50 54 Antifreeze is fla mmable, so keep it aw ay from flame. Antifreeze is to xic. When open the dra in valve, be careful n ot to get water containing antifreeze on you . If it gets in your eyes, flush your eyes with large amount of f resh water and see a doctor at once .

When changing the coolant or drainin g the coolant from th e radiator before c arrying out repairs, ask a specialist company to handle any co olant containing antifr eeze, or contact you r Komatsu distributor. Antifreeze is toxic, so never pour it into tributor. into drainage water ditches or drain it onto the ground surface. Use antifreeze a nd appropriatewater for diluting. (for de tails, see "COOLANT A ND WATER FO R DILUTION (PAGE 4-5)") or the coolant. ll water or other such water supply must be used, contact your Komatsu distributor. use of an antifreeze density gauge to control the mixing proportions.

Use city water f If river water, we ll water or other suc h water supply mu st be used, c ontact yo ur Komatsu dist We recommend use of an antifreeze density gauge to control the mi xin g proportions. Prepare a conta iner whose capacity is larger than the specified coolant volu me to catch drain Prepare a hose to supply antifreeze coolant and water. . Stop the m achine on level grou nd, then stop the e