OPERATION 4. While thrusting the bucket into the material, also raise the lift arm to prevent the bucket from going in too far. By raising the lift arm, ample traction will be produced by the front tires. 5. Check that there is enough material loaded into the bucket, then operate the bucket control lever to tilt the bucket and load the bucket fully. REMARKS: If the bucket edge is moved up and down while pushing in the bucket and digging, the front wheels could raise up and allow the tires to slip. 6. If there is too much material loaded in the bucket, tilt and dump the bucket quickly to remove excessive load. This prevents spillage of the load during hauling. 2-59 WA420-3MC