Komatsu — 24.8.1 REPLACE FUELFILTER CARTRIDGE

MAINTENANCE 24.8 EVERY 500 HOURS SERVICE Maintenance procedures for every 50, 100 and 250 hours service should be repeated at this time. 24.8.1 REPLACE FUEL FILTER CARTRIDGE WARNING Engine temperature remains high immediately after the machine has been operated. Wait for engine to cool down before replacing the filter. Keep fire and/or sparks away from the fuel. The spin-on type fuel filters cannot be cleaned and should not be disturbed until they are replaced. For average conditions, use the interval listed in the Scheduled Maintenance Guide (sooner if power loss is evident; more often for unusually contaminated fuel). If power loss persists, consult your Komatsu distributor.

Prepare a filter wrench and a container to catch the fuel. Fuel catch container . . . . . . . Min 3.8 Filter wrench . . . . . . . . . . . . . . . . . . . . . . . 09019-08035 1. Set the container to catch the fuel under the filter cartridges. Clean the area around the fuel filters. 2. Using a filter wrench, remove filter cartridges. 3. Clean the filter holder, especially the gasket surfaces. Replace the filter O-rings. 4. Fill a new filter cartridge with clean fuel. Coat the packing surface with engine oil, then install it to the filter holder. 3-52 WA420-3MC