12. OPERATION 12.6 CHANGING DIRECTION WARNING When changing direction between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so be particularly careful when changing direction to travel in reverse. Do not switch between FORWARD and REVERSE when traveling at high speed. When switching between FORWARD and REVERSE, depress the brake to reduce the travel speed sufficiently, then change the direction of travel. (Max. speed for changing direction: 12 km/h (7.5 MPH)) There is no need to stop the machine even when switching between FORWARD and REVERSE. Place directional lever 1 in the desired position.
REMARK If the gear shift lever is operated slowly or it is stopped between speed ranges, error code “CALL” may be displayed. This is not a failure: the gear shift lever must be operated to complete the gear shifting within 2 seconds. 12.7 TURNING WARNING It is dangerous to turn the machine suddenly at high speed, or to turn on steep hills. If the engine stops when the machine is traveling, the emer- gency steering is actuated. However, the emergency steering only works while the machine is traveling, so if the machine stops, the emergency steering can no longer be used. This is particularly dangerous on hills, so never stop the engine when the machine is traveling.
If the engine stops, stop the machine immediately at a safe place. When traveling, use steering wheel 1 to turn the machine. With this machine, the front frame is joined to the rear frame at the center of the machine by the center pin. The front and rear frames bend at this point, and the rear wheels follow in the same track as the front wheels when turning. Turn the steering wheel lightly to follow the machine as it turns. When turning the steering wheel fully, do not turn it beyond the end of the stroke. AE061860 2-78