11. EXPLANATION OF COMPONENTS 2. TRANSMISSION CUT-OFF SWITCH WARNING If the machine has to be started on a slope, always turn the transmission cut-off switch to OFF and depress the left brake pedal. Then depress the accelerator pedal while releasing the left brake pedal to start the machine off slowly. Press the push button to switch ON and OFF. When the pilot lamp is pressed, it will light up and come ON; if it pressed again, the pilot lamp will go out and the transmission cut- off will be turned OFF. Normally, put this switch in the ON position. 1 OFF: Acts as normal brake (like right brake pedal). 2 ON: Acts as normal brake, but also switches transmission to NEUTRAL.
If the switch is at ON, the transmission cut-off pilot lamp will light up. REMARK General loading work can be carried out more smoothly if the transmission cut-off function is not used. 3. FRONT AND SIDE WORKING LAMP SWITCH WARNING Always turn the working lamp off before traveling on public roads. When turning on the front working lamp, turn the lamp switch to the ON position for the side clearance lamp or ON position for the head lamp, then operate the switch. When the pilot lamp is pressed, it will light up and come ON; if it pressed again, the pilot lamp will go out and the working lamp will be turned OFF.
The working lamp will not light up if the lamp switch is not at the ON position for the side clearance lamp or ON position for the head lamp. 4. REAR WORKING LAMP SWITCH WARNING Always turn the working lamp off before traveling on public roads. When turning on the rear working lamp, turn the lamp switch to the ON position for the side clearance lamp or ON position for the head lamp, then operate the switch. When the pilot lamp is pressed, it will light up and come ON; if it pressed again, the pilot lamp will go out and the working lamp will be turned OFF.
The working lamp will not light up if the lamp switch is not at the ON position for the side clearance lamp or ON position for the head lamp. 2-15