Komatsu — 11.12 TOOL BOX

11. EXPLANATION OF COMPONENTS 11.9 GREASE PUMP The grease pump is stored in the engine hood on the left side of the machine. After using it, wipe off all grease stuck to its outside of the pump, then store it. 11.10 BACKUP ALARM This sounds an alarm when the directional lever is set to the R position. It is used to warn people behind the machine that the machine will travel in reverse. 11.11 DOOR-OPEN LOCK This can be used to hold the door open. Open the door so that tip 2 of the lever is aligned with groove 1 for the lock, then pull down knob 3 as shown in the diagram. When using the door-open lock, be sure to apply the lock securely.

When releasing the lock and closing the door, push up knob 3 and insert pin 4 securely the groove. 11.12 TOOL BOX The tool box is installed in the brake component box of the left side of the machine. Use it to store tools, etc. 2-31