JCB — 37.pdf (p.37)

Section C - Electrics Basic System Operation Heated Seat Heated Seat Operation C030500GB-2 Fig 99. When the heated seat switch is selected, an electrical current passes over the seat thermostat to the heating element. The element will then warm the seat. The thermostat is set to 20°C - ON and 30°C - OFF. On initial starting when the heated seat switch is selected, the heated seat element will turn on only if the thermostat is below 30°C. Once the thermostat reaches 30°C the heater will turn off. The element will only be re-heated if the thermostat temperature falls below 20°C. C-110 C-110 9803/9880-3