Section C - Electrics Service Procedure Testing of ECU Inputs + Outputs TC-014_2 Remove panel behind drivers seat, for access to the ECU A . Testing Low Side Input With the switch open the meter will read 0v. With the switch closed the meter will read 24-28v. ECU Switch (rocker, momentary, pressure, level, etc.) Input Red lead V Black lead C005840GB Fig 2. Testing High Side Input A With the switch open the meter will read 0v. With the switch closed the meter will read 24-28v. ECU C030670-C1 Fig 1. Switch (lights, engine preheat, etc.) Care should be taken when testing the inputs + outputs of the ECU to ensure that correct test method is used to determine if the ECU is functioning normally.
Input Red lead Note: Inputs/outputs should be checked with engine running or in solenoid override mode, refer to Section C, EMS Set+Mode (20 sec) Menu. V Black lead C005850GB Fig 3. C-165 C-165 9803/9880-3