Section E - Hydraulics Basic System Operation Introduction to Hydraulic Schematic Symbols Introduction to Hydraulic Schematic Symbols General (Basic and Functional Symbols) TE-001 Table 3. Rams Complex hydraulic components and circuits can be described to the engineer by using graphical symbols. The following pages illustrate and give a brief description for some of the more common symbols used. There are many symbols in use and it would be impossible to include them all here. However it should be noted that most are only variations or refinements on the basic principles explained here. If more detailed information is required you are recommended to obtain a copy of BS2917 or IS01219.
Once familiar with the symbols, the engineer can use hydraulic circuit diagrams as an aid to fault finding. It will be possible to see the complete hydraulic circuit and decipher the relationship between hydraulic components. Table 4. Pumps and Motors Table 2.
General E-8 E-8 9803/9880-3 Single acting Double acting Double ended Double acting with damping at rod area end Variable capacity pump two directions of flow Fixed capacity motor one direction of flow Fixed capacity motor two directions of flow Variable capacity motor one direction of flow Variable capacity motor two directions of flow Spring Flow restriction affected by viscosity Direction of flow Indication of rotation Indication of direction and paths of flow Variable control