Section E - Hydraulics Slew Motor Removal and Replacement Removal and Replacement TE-027 X C078320 Fig 3. Removal 3 Make an alignment line across the gearbox and motor mounting flanges, to provide a reference during assembly. !M WARNING Hydraulic Pressure Hydraulic fluid at system pressure can injure you. Before connecting or removing any hydraulic hose, residual hydraulic pressure trapped in the service hose line must be vented. Make sure the hose service line has been vented before connecting or removing hoses. Make sure the engine cannot be started while the hoses are open. 4 Remove bolts X .
5 Using suitable lifting equipment carefully lift slew motor until clear of machine, refer to Section E, Technical Data . INT-3-1-11_2 1 Make the machine safe, refer to Section E, Service Procedures . 2 Disconnect all hydraulic hoses from the slew motor and plug all orifices to prevent ingress of dirt. Label each hose before disconnection. E-137 E-137 9803/9880-3