Section E - Hydraulics Slew Motor Reduction Gear Assembly Removal and Replacement TE-028 Y X C077990 Fig 1. Removal 1 Make the machine safe, refer to Section E, Service Procedures . !M WARNING 2 Remove slew motor, refer to Section E, Slew Motor . Hydraulic Pressure Hydraulic fluid at system pressure can injure you. Before connecting or removing any hydraulic hose, residual hydraulic pressure trapped in the service hose line must be vented. Make sure the hose service line has been vented before connecting or removing hoses. Make sure the engine cannot be started while the hoses are open. 3 Disconnect all hydraulic hoses from the slew gearbox and plug all orifices to prevent ingress of dirt.
Label each hose before disconnection. 4 Remove bolts X and reference pin Y . 5 Using suitable lifting equipment carefully lift slew gearbox until clear of machine, refer to Section E, Technical Data . INT-3-1-11_2 E-153 E-153 9803/9880-3