JCB — 106.pdf (p.106)

Section E - Hydraulics Rotary Coupling Dismantling Dismantling as a guide to the dismantling and assembly procedures refer to the sectional illustration, K Fig 1. ( T E-171) . 1 Remove the bolt 5-B and cover 5-A . 2 Remove the 'O'-ring 5-C . Do not reuse the 'O'-ring 5-C . 3 Remove bolts 5-D and the thrust plate 5-E . 4 Remove seal 5-F . G A B C E D H F C031300-C1 Fig 6. 6 Remove the V-ring 7-J and nylon ring 7-K from the axle 7-H . Note: Do not reuse the V-ring J and nylon ring K . Fig 5. 716630-C1 5 Using a jig push off the axle 6-G from the rotor 6-H . Do not hit with a hammer. E-174 E-174 9803/9880-3