JCB — 39.pdf (p.39)

Section 3 - Maintenance Routine Maintenance Daily Checking Daily Checking It is vital to check certain machine functions and components daily to ensure that the machine can be operated safely and efficiently. !M WARNING Do not remove the hydraulic tank filler cap or cover plate when the engine is running. The hydraulic system is under pressure. You or others could be injured. First stop the engine and then release the pressure. 1 Prepare the machine. K Prepare the Machine for Maintenance ( T 3-29) . 2 Visual check. Check the machine for the following: 8-3-4-4 a Oil, fuel and coolant leakage. 5 Hydraulic oil level check and refilling.

K Checking the Fluid Level ( T 3-82) , K Topping-up Fluid Level ( T 3-82) . b Broken or loose fasteners. c Wire breakage, short circuit of cables and terminal anchorage. 6 Check the mounting bolts of the fuel and hydraulic oil tanks for looseness and for fuel and hydraulic oil leakage. d Oil cleanliness. e Dust accumulation. 7 Check the mounting bolts of the electrical parts and battery terminals for looseness and wire breakage. f Structures for damage. 8 Crawler. !M WARNING a Check the shoes for looseness, wear and breakage. Refer to Introduction Section, Component Location . The cooling system is pressurised when the coolant is hot.

When you remove the cap, hot coolant can spray out and burn you. Make sure that the engine is cool before you work on the cooling system. b Check the track motor, upper/lower rollers and idler wheel for oil leakage and wear. Refer to Introduction Section, Component Location . 9-3-3-1_2 g Coolant level check and refilling. K Engine ( T 3-56) . c Check each mounting bolt for looseness and/or missing bolts. 3 Checking after initial start-up 9 Boom/Dipper a Engine oil level is checked automatically. Check monitor display at start up for possible warning. Check the high pressure hoses/joints and the hydraulic rams for oil leakage. b Operation of horn and gauges.

10 Accumulator - Check charge c Ease of engine starting, abnormal noise and exhaust gas colour. a Extend dipper and raise boom. b Apply engine shutdown. d Oil, fuel and coolant leakage. 4 Fuel level check and refilling. refer to Operation Section, Refuelling the Machine . c Operate boom down function. d Ensure boom lowers to the ground under its own weight. 11 Bucket and Linkage. 3-34 3-34 9803/JSM-0412