JCB — 68.pdf (p.68)

Section 3 - Maintenance Routine Maintenance Troubleshooting Troubleshooting To extend the service life and improve the operation of the machine, daily inspection and lubrication are necessary as well as immediately isolating any problem found and dealing with it. If the machine is operated with the problem uncorrected, it may lead to larger trouble and possibly to a big accident. If trouble occurs, search for the cause in the items below and make adjustments, repairs, etc. as necessary. If the cause cannot be isolated, contact your JCB distributor. Engine and Related Area Table 27. Engine does not start Table 28. Engine stops during operation Table 29.

Low oil pressure 3-99 3-99 9803/JSM-0412 Cause Remedy Defective starter switch Connect, repair connection Defective rotation of starter (Starter rotates slowly) Discharged battery, starter problems, contaminated or loose wiring connection Improper viscosity of engine oil Inspect and replace as necessary Excessive cooling of engine (Cold weather) Preheat with air heater.

Warm up the coolant (add hot water) Possible seizure in engine Repair(1) Incomplete air bleeding of fuel system Completely bleed air No fuel in fuel tank Refill Fuel quality unsuitable Inspect and replace as necessary Fuel filter clogged Clean or replace Low compression Repair(1) Defective fuel injection system Repair(1) Cause Remedy No fuel in fuel tank Refill Fuel filter clogged Clean and replace Air is mixed in the fuel system Retighten fuel pipe connections and bleed system Cause Remedy Low oil Refill Defective oil pressure switch Replace(1) Oil filter clogged Replace element Low oil viscosity Replace with oil of viscosity matching temperature Improper operation of oil pump Replace parts(1) Oil leakage at connections Tighten connections