Section 3 - Maintenance Routine Maintenance Troubleshooting Working Attachments Table 50. Overall low power Table 51. Defective operations Table 52. Insufficient work power Table 53. Attachment sinks down (1) Indicates jobs which should be done by a specialist. Table 54.
Abnormal noise from joints of the attachment 3-105 3-105 9803/JSM-0412 Cause Remedy Insufficient engine output Refer to Engine Service Manual Function drops due to wear of hydraulic pump Replace hydraulic pump(1) Defective main relief valve Adjust the pressure or replace(1) Low hydraulic oil Refill Viscosity of hydraulic oil incorrect Replace with hydraulic oil of proper viscosity Suction filter clogged Replace suction filter Cause Remedy Hydraulic pump broken Replace hydraulic pump(1) Hydraulic oil low Replace suction filter Cause Remedy Set pressure for main or port relief valve is low or incorrect Adjust pressure or replace relief valve(1) Damaged hydraulic ram seals Replace hydraulic ram seals(1) Damaged hydraulic ram, cylinder Replace hydraulic ram/cylinder or the assembly(1) Cause Remedy Damaged hydraulic ram seals Replace hydraulic ram seals(1) Damaged hydraulic ram, cylinder Replace hydraulic ram/cylinder or the assembly(1) Oil leakage inside control valve Repair valve assembly, replace(1) Oil leakage inside holding valve Repair valve assembly, replace(1) Cause Remedy Insufficient grease Grease Connecting pin seizure Replace the bushing and/or pin