DISASSEMBLY AND ASSEMBLY CYLINDER HEAD REMOVAL OF CYLINDER HEAD ASSEMBLY 3 Disconnect the cable from the negative (–) ter- minal of the battery. 1 1. Remove cover (1), partition (2), and air cleaner assembly (3). 1 2 CEP00447 2. Remove turbocharger lubrication tube (4) and outlet tube (5). 3. Remove intake hose (6), turbocharger assembly (7), and adiabatic cover (8). 2 4. Remove heat isolation plate (34) and 2 mount- ing bands of exhaust muffler assembly (9), and lift off muffler assembly. fl Pull out completely from the muffler water drain tube before removing. 3 PC400, 450-6 30-27