47 OPERATOR STATION REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 313-733 1 OPERATOR FRAME 2. 117-156 1 TORSION SPRING 3. 354-454 1 HANDLE SPACER 4. 125-813 2 COMPOSITION BUSHING (1") 5. 319-499 1 HANDLE 6. 106-345 2 SCREW (M20-2.50 X 50mm) 7. 105-423 1 WASHER (3/4") 8. 111-001 2 WASHER (M51.2) 9. 125-754 1 COMPOSITION BUSHING (2") 10. 179-226 1 TAPERED PIN (50.8mm X 272mm) 11. 105-245 2 SCREW (M10-1.50 X 25mm) 12. 106-396 1 WASHER (M10, HARDENED) 13. 110-084 2 BRASS BUSHING (1-5/32") 14. 125-771 1 COMPOSITION BUSHING (1.25") 15. 181-981 1 TAPERED INSERT (1") 16. 151-031 1 CYL (2" X 1" X 8") 17. 125-770 1 COMPOSITION BUSHING (1") 18. 184-064 1 TAPERED INSERT (2") 19.
350-989 2 FLOOR TREADS 20. 106-561 5 LOCKNUT (M8-1.25,PRV TRQ,10.9) 21. 106-399 1 WASHER (M20, HARDENED) 22. 106-336 1 SCREW (M12-1.75 X 90mm) 23. 217-007 1 WORKING LIGHT (CLEAR, RECT) 24. 105-503 1 ROLL PIN (1/4" X 2") 25. 110-093 2 MACHINERY BUSHING (1-1/4", 18GA) 26. 179-225 1 PIN (31.75mm X 60mm) 27. 350-988 1 CHANNEL COVER 28. 183-767 1 TAPERED PIN (25.4mm X 60mm) 29. 106-538 2 LOCKNUT (M6-1.00, PRV TRQ, 10.9) 30. 106-551 11 CLIP NUT (M8-1.25) 31. 106-685 1 LOCKNUT (M12-1.75, PRV TRQ, 10.9) 32. 106-381 5 FLG LK SCREW (M8-1.25 X 25MM) 33. 106-992 6 FLG LK SCREW (M8-1.25 X 25MM) 34. 354-488 1 STEP 35. 354-500 1 WIRE COVER 36. 314-723 1 COVER 37. 106-595 2 SCREW (M6-1.00 X 60mm) 38.
106-388 4 WASHER (M6) 39. 105-223 1 WASHER (3/8") 40. 192-006 1 HIGH FREQUENCY HORN 306-609 1 HIGH FREQUENCY HORN---------------------- 192-005 1 HORN BRACKET OBSOLETE 41. 214-416 1 HORN (ELECTRIC) 42. 106-991 5 FLG LK SCREW (M8-1.25 X 20MM) NOT SHOWN: FOOTNOTES: NOTE: 06 ID0030885