7. BFI 1 SAIBFI 30A 5. Slide off the corrugated cardboard engine cover protector. 7. Remove the two nuts and remove the steel band from the outboard motor. STEEL BAND (mglnr cow protector) 6. Remove the plastic cover from the outboard motor. NUf (2) PLASnC COVER / 8. Connect a hoist to the engine hanger. Carefully lif! the outboard motor with the lower crate frame attached. Use a suitable hoist with a capacity rating of 550 Ib (250 kg) or more. Lift up the outboard motor while supporting it and take care not to let the outboard motor swing. Take care not to damage the timing belt cover while lifting the outboard motor. ENGINE HANGER t TlMlNQ BELT COVER 7-3 Date of Issue:
June 2003 0 2001-2003 American Honda Motor Co., Inc.