honda — BF200A/BF225A

8. BF2OONBF225A 6. Attach a three point engine chain sling to the three engine hangers. As necessary, use clean protective pads between the anchors and the engine bell cover or other related parts. Use an overhead gantry type crane with a lift capacity of at least 2oooSbs. Do not use an automotive type telescoping hydraulic crane. This type of crane may tend to Up whenlhe boom is extended and the engine is lied to the Installation height. Before each use, inspeCtthe sling evrd all fasteners and attachments tor damage or defects. Additionat inspections should be performed during sling, use. Damaged or defective slings must be immediately removed from service.

Lift up the motor up with the mte frame still attached. With the crate @me uprisht and the lower crate frame resti,~ on the floor, remove the crate frame from ttk motor by removing the four flange nuts. Before installing the engine cover, remove the plastic covers from the air intake mouths of the engine to prevent damage to the engine. 6 8-3 Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc.