9. GAUGES Water Pressure Gauge* Ref 1 Qty. Description 1 Water Pressure Gauge Mounting Bracket Rubber Hose @I& 0 1/8" NPT Fitting 1/8" BSPT (British Pipe Ac 1/8" NPTF (National Thread- male) Pipe Thread- female) I 7 I 1 I Adaptor1/8"NPTFToBSPT I * The water pressure gauge is not included in the 5 gauge set. It must be ordered separately. Use the Teleflex Instrument Harness (PIN 32200-ZW7-000AH) to connect Teleflex gauges to the Honda main harness (refer to 9-36). GAUGE INSTALLATION 1. Disconnect the negative battery terminal cable. 2. Select a mounting location for the appropriate gauge(s) which provides easy readability from the operator's position.
Check behind each mounting hole location for sufficient installation clearance. Volt Meter Fuel Gauge I 52.4 rnrn (2-1/16") I 52.4 rnrn (2-1116") 4. Mount the gauges with the appropriate mounting bracket, star washers and lock nuts as shown starting on the next page. Tighten the nuts until the gauge can no longer be rotated in the dash. 3. Cut a hole in the dash for each gauge to the specification shown. Do not overtighten the mounting nuts. Overtightening the nuts June crack the gauge housing, mounting bracket or mounting panel. If necessary, shorten the clamp legs if the dashboard thickness exceeds clamp grip range. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 9134