honda — Gauges

BF200/225 1. water pressure access plug (located above ADAPTOR 1/8" NPTF TO BSPT* I Use a 5 mrn hex wrench and remove the the starboard exhaust manifold). 2. Apply sealing compound to the adaptor 1/8" NPTF to BSPT (supplied with kit*) and install the adaptor securely where the access plug was removed. 3. Apply sealing compound to the 1/8" NPT brass hose fitting (supplied with kit) and install the fitting securely in the adaptor. 4. Use a 7/32" drill bit and open the hole through the grommet membrane. CABLE TIE RUBBER HOSE MEMBRANE 5. Route the rubber hose through the hole and to the hose fitting. 6. Secure the hose to the brass fitting with a cable tie. 7.

Use cable ties and secure the rubber hose to various spots on the motor making sure the hose does not come into contact with any moving parts or hot components. *Some water pressure gauge kits will not have the adaptor supplied. Do not use the 118" NPTF adaptor. Order P/N 19271-ZV5-000 BSPT 118" hose barb fitting. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc.