1. COMMON MODEL INFORMATION Torque Specifications TECH N ICAL I N FOR MATI 0 N Bolt Torque Specifications . These are the recommended maximum torclue values for reusable drv Values are stated in: inllbs (Nm) bolts. Bolts should be torqued to this value.+O% -20%. For lubricated- bolts, multiply the dry bolt torque values by .75.
Bollske 1116ss Brass 2-56 2.5 (282) 2.0 (226) 2-64 3.0 1.338) 2.5 1.2821 3-48 3.9 (440) 3 2 (361) 3-56 4.4 (497) 3.6 (.407) 4-40 5.2 ( 9 7 ) 4.3 1.486) Boll Slm 184SS Brass Bolt SIm ll)-8SS Brass 6-32 S.S(l.08) 4.9(.554) Y16'-18 132.0(14.91) 107.0(12.10) 6-40 12.0(1.35) 9.9(1.12) Y16'-24 142.0(16.04) 116.0(13.11) 8-32 20.0 (2.25) 16.0(1.81) 3W-16 236.0 (26.66) 192.0 (21.71) 8-36 22.0 (2.48) 18.0 (2.03) 318'-24 259.0 (29.20) 212.0 (23.97) ~~ 10-24 23.0 (2.59) 19.0 (2.14) 10-32 32.0 (3.61) 26.0 (2.94) 114'20 75.0 (8.47) 62.0 (7.01) 114'-28 94.0 (10.6) 77.0 (8.70) Values are stated in: ftllbs (N.m) Boll 512.
1116ss B n U 7/16'-14 31.0 (42.00) 26.0 (35.25) 7/16'-20 33.0 (44.74) 27.0 (36.61) 112'-13 43.0 (58.30) 35.0 (47.45) 112'20 45.0 (61.01) 37.0 (50.17) Bolt Slm 1WSS B ~ u Bolt 512. 1M)SS B R U 5/8"-11 93.0 (126.09) 76.0 (103.04) 1'-8 287.0 (389.12) 235.0 (318.62) ye'-18 104.0 (141.00) 85.0 (115.24) 1'-14 259.0 1351.16) 212.0 1287.43) W4'-10 128.0 (173.55) 104.0 (141.00) 3/4"-16 124.0 (168.12) 102.0 (138.29) 7W-9 194.0 (236.03) 159.0 (215.58) 7W-14 193.0 (261.67) 158.0 (21422) 9/16'-12 57.0 (77.28) 47.0 163.72) Torque values for 18-8 stainless steel and brass bolts are taken from a torque guide by I77 Harper.
All results correspond well with basic bolt equations, using a bolt factor of 0.2 and a factor of 3/4 for a reusable connection. Helm Pump DISPLACEMENT RELIEF VALVE PORTS SeaStar 1.7 1.7 cu. in. (27.8 cc) 1000 PSI (68 Bar) 1/4" NPT SeaStar 2.4 2.4 cu. in. (39.3 cc) 1000 PSI (68 Bar) 1/4" NPT SeaStar Pro 2.0 2.0 cu. in. (33.0 cc) 1500 PSI (102 Bar) 1/4" NPT Helm Pump Shaft TAPER KEY SIZE THREAD SeaStar 1.7 3/4" Standard, 1" per ft. 5/8" NF 3/16" SeaStar 2.4 3/4" Standard, 1" per ft. 5/8" NF 3/16" SeaStar Pro 2.0 3/4" Standard, 1" per ft. 5/8" NF 3/16" Cylinder INSIDE DIAMETER STROKE.
Front Mount (Pivot) 1.375" (34.93 mm) 8" (203 mm) Side Mount 1.250" (31.70 mm) 8" (203 mrn) Splashwell Mount 1.250" (31.70 mm) 9" (229 rnm) VOLUME TORQUE @ u)oo pd (70 Bar) H.O. Splashwell Mount 9.3 cu. in. (152.4 cc) N/A Side Mount 7142/8502 in/lbs (82.1/97.7 Kg) Front Mount (Pivot) 8.34 cu. in. (136.6 cc) N/A 8.25/9.8 cu. in. (135.1/160.8 cc) SeaStar cylinders and all other fittings are 3/8" compression type fittings. Threads are 9/16" x 24 UNEF. A brochure on all SeaStar fittings is available from Teleflex Canada. Fittings SeaStar & Seastar Pro Hose Inside diameter - 5/16" (8 rnrn) 1139 Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc.