1. COMMON MODEL INFORMATION Wire should be visible here Wire crimping on the insulation, not wire 1 Loose strands of wire NO GOOD Wire crimp not crimped evenly GOOD Crimped edges should be even NO GOOD Poor crimping, one side sticks out more Inspect the quality of the wire crimp. If it has any of the following problems, cut it off and start over. Insert the terminal into the connector. into the connector. Make sure the wire seals are pushed all the way Lightly pull on the wires to make sure the terminal Close or insert the secondary terminal lock, if applicable, and reconnect the connector. is locked in place. Date of issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 1152