4. BF25AIBF30A 7. Install a chain connedting link or equivalent, with a minimum l i capacity of 500 Ibs. (227 kg), to the engine hanger bracket. A slip hook should not be connected directly to the engine hanger bracket due to insufficient clearance between the engine hanger bracket and the recoil starter or flywheel wver. Use a hoist with a minimum lift capacity of 500 Ibs. (227 kg). Slowly lift the motor just enough so the foam pad can be removed and transferred to the gear case area. Slowly lii the motor making sure the gear case does not contact the crate base. 8. Remove the two 8 mm nuts from the sub-member and remove the sub-member. Loosen the clamp screws.
Remove the four.8 mm nuts, washers, and pad washers from the stern bracket support. Remove the stern bracket support. WASHE[(4) 8 m m 8 mm (4) PAD CLAMP WASHER (4) ,SUP HOOK CHAIN ' CONNECTING UNK / b ENGINE HANGER BRACKO 1 SUB-MEMBER STERN BRACKET SUPPORT 413 Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc.