4. BF25NBF30A Top Mount Control/Key Switch Panel Connections 1. Disconnect the main engine harness from the key switch panel harness by unplugging the three Sum i tom0 connectors. 2. Plug the mating connectors from the relay box harness into the connectors from the key switch panel harness. 3. Plug the mating connectors from the relay box harness into the connectors on the main engine harness. 12 VDC Power Lead Connections Connect the positive (red) and negative (black) 12 volt DC leads from the relay box to the appropriate positive and negative terminals on the boat’s battery. Be careful not to switch the leads as damage to the relay box could occur.
General Information Coil and band all excess harness lengths and secure in an area away from snags and other moving parts. Try to secure in an area where there will be no chafing or standing water. After connecting the main engine harness Y connectors forward at the control box or key switch panel, stagger the two sets of three Sumitomo connectors and tape off any exposed wires coming from the relay box harness. All functions operate in a normal manner after installation. The engine will tilt up and down with the standard tilt switch in the control box handle or tilt switch in the top mount control handle.
The engine can also be tilted by the tilt switch provided on the side of the motor pan. Harness or other Honda instrument harnesses plugged into the side mount control box or key switch panel harness will support normal trim meter function. The relay box is protected internally by a 15 amp blade-style fuse. If a unit does not function normally, first check all the connectors and then check the main fuse in the engine compartment. If this main fuse is normal, then check the 15 amp fuse inside the relay box. This fuse can be accessed by removing the four (4) Phillips head screws on the top cover of the relay box. Individual component parts are not available separately.
If there is any component failure, the complete assembly will need to be replaced. AVAILABLE ACCESSORIES 1. 2. 3. 4. 5. 6. Consult the Honda Marine Accessories Catalog (M0045) for current information on gauges, instrument harnesses, wiring harnesses, switch panels, and control boxes. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 4-1 7