honda — BF40A/BF50A

5. BF40NBF50A 7. Install a chain conneCting link or equivalent, with a minimum lii capacity of 500 Ibs. (227 kg), to the engine hanger bracket. A slip hook should not be connected directly to the engine hanger bracket due to insufficient clearance between the engine hanger bracket and the recoil starter or flywheel cover. Use a hoist with a minimum lift capacity of 500 Ibs. (227 kg). Slowly l i the motor just enough so the foam pad can be removed and transferred to the gear case area. Slowly l i the motor making sure the gear case does not contact the crate base. 8. Remove the two 8 mm nuts from the sub-member and remove the sub-member. Loosen the clamp screws.

Remove the four.8 mm nuts, washers, and pad washers from the stern bracket support. Remove the stern bracket support. 8 WASHE! mm (4) p (4) 6 mm PAD CLAMP WASHER (4) SCREWS SUP HOOK 8 mm CHAIN CONNECTlNQ LINK ENGINE HANGER BRACKET I SUB-MEMBER STERN BRACKET SUPPORT 5 3 Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc.