honda — BF40A/BF50A

5. BF40NBF50A TRIM METER OPERATION The trim control unit, located on the engine, and the throttle switch, located in the remote control, were removed to eliminate the intermittent overtrim buzzer sound on the BF40A3 BF50A3 (2003 models). This is outlined in the BF40A BFSOA Shop Manual Supplement P/N 61ZV3OOV. The 12 Vdc to 5 Vdc trim control unit voltage converter function was moved to the Honda 4 wire trim meter. One of these trim meters is shipped with each BF40A3 BF50A3 trimltilt model outboard. Connections for a standard BF40A3 BF50A3 trim meter configuration are shown on page 5-36.

Accessory trim meters will not work on these engines unless a 12 Vdc to 5 Vdc Voltage Conversion Module (VCM) P/N 34310-ZV5-01OAH is added to the circuit. Model BF40A3 BF50A3 (5 Vdc output from the trim meter light green and black wire) Trim Meter L (black and redlwhite wires) 4 WIRE .LIGHT GREENBLACK (5 Vdc output) PRE BF40A3 BF50A3 (No 5 Vdc output from trim meter) This also applies to accessory trim meters found in 5 gauge sets and sold separately. B C ack and redlwhite wires) BLACKNELLOW 'Y ELLOWBLUE Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 511 6