MAINTENANCE EVERY 10 OPERATING HOURS MAINTENANCE EVERY 10 OPERATING HOURS LUBRICATION There is danger of severe accidents, if you perform main- tenance work at a machine that has not been parked and secured correctly! Park the machine on a solid, even surface and secure it, before you start to perform maintenance work. 1. Before you start maintenance work, park and secure the machine as described in the chapter "Prior to Start of Main- tenance Measures". 2. Clean the grease nipples marked by arrows. 3. Use a grease gun to fill the grease nipples with a sufficient volume of lubricating grease. Articulated steering (3 points) 4.
Remove the used lubricating grease that is pressed out of the bearings. Perform lubrication more frequently, when working in a continually wet or salty environment. 7-31 1 2 75 216 _ 216 _ 3 75 217 _