TECHNICAL DATA NOISE EMISSION LEVELS Sound pressure level L pA = 73 dB/A Sound power level L WA = 97 dB/A No alterations may be made to the machine which could have an influence on the noise emission levels VIBRATION LEVEL When used for its intended purpose, levels of vibration for the earthworking machine transmitted from the operator's seat are lower or equal to the test vibrations for the relative machinery class in compliance with ISO 7096. The actual acceleration val- ue of the upper limbs is less than 8.2 ft/sІ (2.5 m/sІ). The actual acceleration value for the body is less than 2.5 ft/sІ (0.76 m/s).
These values were determined using a representative machine and with the help of the measurement procedures that are de- fined in the directives ISO 2631/1 and ISO 5349. LIMIT VALUES FOR SLOPES MAXIMUM SLOPE ANGLE FOR OPERATING THE MACHINE If operating the machine on a slope, its angle must not exceed 30° uphill, downhill or sideways. If you angle the machine at more than 30° during operation, the motor, transmission, hy- draulic system or axles, will not be supplied with sufficient oil and can be damaged. A uphill 30° B downhill 30° C sideways 30° 75_046 8-3