ALS-ELECTRONICS OPERATION OF THE ALS-ELECTRONICS SWITCHING ON THE ALS-ELECTRONICS 1. Precondition: Speed range No. 2 must be switched on in order to ensure that the ALS system can be activated. To do this, press the "Driving range up to 20 km/h" button. 2. Press the ALS-Electronics switch. The green control lamp in the switch lights up. If the machine drives faster than 5 k.p.h., the ALS-Electron- ics is automatically activated and the ALS-Electronics con- trol lamp lights up on the dash panel. If the machine drives slower than 5 k.p.h., the ALS-Electronics is switched off and the control lamp on the dash panel goes out.
However, the control lamp in the ALS-Electronics switch remains lit in green. To ensure that the ALS system can remain fully effective when the machine is underway, do not tilt the bucket all the way through till it touches the limit stops. Do not support the boom when on the road. ALS_1 SWITCHING OFF THE ALS-ELECTRONICS Press the ALS-Electronics switch. The control lamp in the switch goes out. 9-3