CONTROLS AND INDICATORS 1. HAZARD FLASHER SWITCH This switch is used to switch on/off the hazard flasher. You may switch on the hazard flasher only in an emergen- cy situation. If you switch on the hazard flasher, all direction indicators of the machine will start to flash. At the same time, the control lamp of the hazard flasher switch and the direction indicator control lamp start to flash. 75_028 2. SWITCH OF FRONT WINDSCREEN WIPER AND WASHER This switch is used to switch on/off the front windscreen wiper and washer. The switch has two switching stages: Switching stage 1 locks in permanently and is used to switch on/ off the windscreen wiper.
If you hold the switch pressed in switching stage 2, the wind- screen washer is only operated for the time you keep the switch pressed. 75_029 3. SWITCH OF REAR WINDSCREEN WIPER AND WASHER This switch is used to switch on/off the rear windscreen wiper and washer. The switch has two switching stages: Switching stage 1 locks in permanently and is used to switch on/ off the windscreen wiper. If you hold the switch pressed in switching stage 2, the wind- screen washer is only operated for the time you keep the switch pressed. 75_029 4-16