K ENWORTH T680 MIRRORS - SERVICE MANUAL 8. REMOTE TROUBLESHOOTING 8.1. ANALYSIS Remote Mirror will not move Remove the main glass . See 2.2 Is the Actuator present? Replace mirror with remote control mirror (if remote power (To identify it see 8.2 ) No mirrors are desired) Yes Remove housing and unplug Actuator connector. See 3 and 4 Replace Actuator Kit #1 - See 4 Is Voltage present at actuator Is Actuator working when voltage is applied directly to No connector when switch is operated? See 8.3 Yes the terminals? See 8.3 Yes Check connection at terminals. Make sure connection is secure. No Remove the mirror from the truck.
See 1 Is Voltage present at truck Cab-internal problem See truck fault finding connector when switch is operated? See 8.4 No Work instructions Yes Wire Harness continuity ok? Replace control cable Kit #4 or 5 - See Error! eference source not found. See 6.4.1 No and 6.1 Yes Check connection at terminals. Make sure connection is secure. Copyright © Lang Mekra North America 2014 Page 22 of 28 Revised: 03/2014