Perkins — Page 1

Chapter 6 N38143 Electronic governor in detail The Synchro-Start APECS® (Advanced Proportional Engine Control System) series 3000 is an isochronous engine governor that provides a means of controlling and limiting engine speed. The controller is set up using an APECS Calibration Tool (ACT, part number 36204). The ACT is computer based software that can be used for monitoring and is available separately. Controller installation and wiring diagram Use the drawing (F) and table to install and wire the controller Connect power leads directly to the switched power source. Use of a 10 amp slow-blow fuse is recommended in the battery (positive) wire.

Use proper terminations and crimping techniques to avoid elevated resistance and shorts. Use of convoluted tubing or other wire shielding is recommended to minimize mechanical damage to the wires. Avoid sharp edges and pinching when routing wires. Mount the controller in a location where the effects of vibration and temperature are minimal. Page 52