. OPERATION OPERATION CHECK OIL LEVEL IN POWER TRAIN CASE, ADD OIL WARNING The parts and oil are at high temperature after the engine is stopped, and serious burns. Wait for the temperature to go down before REMARK 3 - 96 may cause starting the 1. Open t he small cover o n the right upper side of the machine. 2. Remo ve dipstick (G), a nd wipe the oil off wit h a cloth. emove it. 3. Fully in sert dipstick (G) into filler pipe, then r 4. The oi l level should b k (G). dipstic If the o il level is below t he (L) mark, add oil th rough oil fi ller (F). 5. If the o il level is above the H mark, remove cover (1) on the . the bottom of the machine Loose level a n drain plug (P), gain.
drain the excess oil, then check the oil 6. If the o il level is correct , insert dipstick (G) full y into the dipstick guide again. If heckin When c hecking the oil le vel after the engine ha s been operated, llow th e engine to cool for 15 minutes before checking