. OPERATION OPERATION CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING add oil. Doing so may lead to REMARK When inspecting, if the machine is at an angle, move it to a level place to carry out the check. 3 - 98 When remov ing the oil filler cap, oil may spurt out, so stop t he engine and wait for the oil temperature to go do wn, then turn the cap slowly to release the i nternal pressure before rem If oil has bee n added to above the H mar k, stop the engine an d wait for the hydraulic oil to cool down. Then remo ve cover (1), loosen drain plug (2), and drai 1. Park the m achine on a level ground , lower the work e quipment und, and stop the engine 2. Stop the e ngine, wait for approx.
5 minutes, then chec k that t he between the H and L ma rks on sight gaug e (G). NOTICE If the oil level i If damage to the oil pressure circuit and spou 3. If the oil le vel is below the L line, a dd oil through oil fi ller (F) at the top of the hydraulic tank.