. OPERATION OPERATION ADJUST MIRROR WARNING ADJUST STEERING, FORWARD-REVERSE, GEAR SHIFT LEVER WARNING click is heard. Lock lever (1) REMARK PCCS: Palm command control system 3 - 107 Be s ure to adjust the mirr ors before starting work. If they are not adjusted properly , you cannot se cure the visibility and may be injured or may injure som eone seriously. Loosen nut (1) of the mirror and adjust the mirror to a position t. where it gives the bes t view from the operator's sea In p articular, be sure t o adjust the mirror so that peo ple at the rear left or right of the mac hine can be seen clearly.
Afte r moving case (2) in o rder to adjust the position of the steering, forward-reverse , gear shift lever , secure lock lever (1) i nto the notched hole, making sur e it is in the LOCK position. If it i s not completely locked, the steering, for ward-reverse, gear shi ft lever may unexpectedly move and cause damage, serious injur y, or death. The steering, forward- reverse, and gear shift lever c an be adjusted by 90 m m (3.5 in) in 9 stages to the front o r rear. Adjust to the most suit able position to match the ad justment of the operator's seat. 1. Pull up lock lever (1 ) to the FREE position (F) at t he rear of case (2) on left side of t he operator's compartment. nd to grip the 2.
With lock lever (1) front of case (2), t pulled up, use your other ha he hen move it forward with you r left and right hands. The steeri ng, forward-reverse, gear shift lever moves with case (2). 3. Move case (2) to Then pull up lock the desired position until a lever (1) and release it. L automatically retur ns to the LOCK position (L).