. OPERATION OPERATION OPERATION OPERATION to F1 - F3 When traveling in reverse: Possible to change speed range used to R1 - R3 3 - 128 Manual shift mo Changing m aximum speed range use d when travelin ng forward: Possible to ch ange speed ra nge used up switch (a): E ach time it is pressed, sp eed range use d goes up one range : Each time it is pressed, speed range used goes down switch (b) down one range speed range u sed goes REMARK F3L and R3L are speed ranges where the engine spe ed is controlled at 3rd and the spee d range is set to a range between 2nd and 3rd.
When startin g the machine up a slope in 3L, dependi ng on the condition, the machine m ay be started in 2nd to ensure safet first from N t y. For example, when shif ting from N to F 3L when starting off up a slope, the transmission may shift o F2, and then shift to F3 L according to t he load. In automatic shift mode, if the maxim um speed rang e has been forward-reve in the preset rse, gear shift lever to the Neutral positio n. The setting is returned to the ma ximum speed range set mode before starting to t ravel (when the transmission was at neutral). In the autom atic shift mode and manu al shift modes, the preset (speed range to start) ca nnot be changed while the machine is traveling.