Komatsu — PRECAUTIONS FOR OPERATION

. OPERATION OPERATION PRECAUTIONS ON SLOPES fuel level on the fuel gauge enters the red range, add fuel immediately. (A): Red range (B): Green range REMARK IT IS PROHIBITED TO KEEP THE DOOR OPEN DURING OPERATIONS (Machine equipped with cab) Always keep the door closed when traveling or carrying out operations. If the door is open, there is danger of damage from obstacles or strong vibration. IT IS PROHIBITED TO MODIFY THE CAB GLASS IN ANY WAY THAT WILL OBSTRUCT THE VIEW 3 - 134 BE CAREFUL OF FUEL LEV EL If the fuel level in the fuel tan k becomes low when working on slopes, the engine may suck i n air because of the angle of the machine or the sway ing of the machine.

This makes the engine stop, so be careful not to let the fuel level in the fuel tank become too lo When working on slope TAKE CARE OF ENGINE SP EED ON SLOPES Set the fuel control dial to a medium speed or higher position and prevent the travel speed from increasing with the decelerator pedal and brak e pedal. BE CAREFUL OF OIL LEVE L n sloped areas of more than 20°, fill all appropriate componen When operating machine o PRECAUTIONS WHEN ENG INE STOPS ON SLOPES If the engine stops while w orking or traveling on a hill, immediately depress the brake ped al to bring the machine to a complete stop.

PRECAUTIONS FOR US ING BRAKE The following actions caus e premature damage to the brakes, so avoid such operations. Using emergency brake at full speed Using brake with engine running at full speed in first gear (F1, R1) (Machine stall cond Always depress the decele rator pedal to lower the engine speed before actuating the bra (Machine equipped with ca b) For safety reasons, do n ot install anything on the cab glass that will obstruct the view. Always keep the glass c lean to ensure safety during operations. PRECAUTIONS FOR FL OATING BLADE If the blade is operated to FLOAT when the engine is running at low speed or when it is i dling, hunting may occur.

Raise the engine speed w hen carrying out the FLOAT operation.