. OPERATION OPERATION ADJUSTING TILT FOR USING BLADE IN ANGLED POSTURE Angledozers only PARKING MACHINE WARNING depressing the brake pedal, usually depress decelerator pedal (2) to reduce the engine speed and machine travel speed. 2. Set steering, forward-reverse, gear shift lever (3) to the N position. 3 - 149 Perform the follo wing adjustment to adjust the brace length properly. 1. Return the bl ade to the standard posture ( non-angled posture). 2. Adjust the bla 3. Angle the bla Avoid stopping s uddenly. Give yourself ample ro om when stopping. When stopping dangerous place the machine, select flat har s.
If it is unavoidably necessary t d ground and avoid o park the machine on a slope, place the blocks undernea parking brake lever (4) in the LO th the track shoes. As an addit CK position and insert ional safety measure, thrust the blade If the work equi into the ground. pment control lever is touched by accident, the work equipment may s uddenly move, and may cause d amage, serious injury, or death. Befor e leaving the operator's seat, always secure work equipment lock l ever (7) in the LOCK position. 1. Depress brak e pedal (1) to stop the machi NOTICE If the brake pedal is speed is high, the depressed when the engine sp brake disc may produce a sl eed or machine travel ipping sound. When