. MAINTENANCE SERVICE PROCEDURE CHECK, ADJUST AIR CONDITIONER (Machine equipped with cab) CHECK LEVEL OF REFRIGERANT WARNING so 4 - 37 CHECKING TENSION OF COMPRESSOR BELT ring the coolin If t he driving belt sla ckens, it is likely to slip, lowe efficiency. Depress the mid point between drive 2) with a thumb (approx. 98 pulley (1) an compressor pulley ( N (10 kg)) eve now and then to mak e sure that deflection amount (A) is approx. 1 mm to 18 mm (0.59 to 0.71 in). When it is a new bel t, elongation is expected in th e initial period use, so be sure to replacement. make an adjustment in a few days after th Be sure to handle th e refrigerant (gas) according to t he local regulations .
If the refrigerant use d in the air conditioner gets into y our eyes or on y our hands, it may cause l oss of sight or frostbite. D o not touch the refrigeran t. Never loosen any part of the re frigerant circuit. s leaking. Do not bring any fla me close to any point where the refrigerant gas i If t he level of the ref rigerant (gas) is low, the cooli ng effect will b reduced. Run the e refrigerant gas (R13 ngine at high idle, and check 4a) in the refrigerant circuit t the flow of th hrough the sig glass (2) (inspection running at high spee (A) Correct: No b window) of the receiver (1) when the cooler d.
ubbles are included in the flow are included in the flow pass continuously) ss, transparent (B) Low: Bubbles (bubbles (C) None: Colorle REMARK When there are bubbles, the refrigerant gas level is low, s contact your refri gerant dealer to have refriger ant added. If th air conditioner is run with the refrigerant gas level low, it w the compressor. a is used as the refrigerant. cause damage to New Freon R134 OPERATING AIR CONDITIONER OFF-SEASON Even during the off-s eason, operate the air conditi oner for 3 to 5 minutes once a month to maintain the oil film at al parts of the compres sor.